top of page

Stoned Yoga

Public·13 members
Andrew Fedotov
Andrew Fedotov

How to Use KPG-D6 to Customize Your Kenwood NX-1200 and NX-1300 Devices

KPG-D6 Download: How to Get and Use the Kenwood Programming Software for NX-1000 Series Radios

If you own a Kenwood NX-1000 series radio, you might be wondering how to program and configure it according to your needs and preferences. The answer is simple: you need KPG-D6, the official programming software for these radios. In this article, we will explain what KPG-D6 is, what it can do, how to get it, and how to use it.

kpg-d6 download

What is KPG-D6 and what does it do?

KPG-D6 is the genuine and official programming software for the NX-1000 series (NX-1300, NX-1200, NX-1700, NX-1800) two-way radios for use in North America (USA/Canada) and Europe (UK/Ireland). It allows you to access the full capabilities of these radios, such as:

  • Setting up channels, zones, scan lists, contacts, groups, etc.

  • Choosing between FM analog, DMR digital, or NXDN digital modes

  • Enabling encryption, mixed mode, emergency features, etc.

  • Customizing the display, buttons, tones, alerts, etc.

  • Updating the firmware of the radios

KPG-D6 is a Windows-based software that requires a license key and a programming cable to work. It is compatible with Windows XP, Vista, 7, 8, and 10 operating systems.

What are the benefits of using KPG-D6?

Using KPG-D6 has many advantages over other methods of programming your radios. Some of them are:

  • You can program multiple radios at once using a cloning function

  • You can save and load different profiles for different scenarios

  • You can backup and restore your radio settings in case of loss or damage

  • You can customize your radio according to your specific needs and preferences

  • You can keep your radio updated with the latest features and improvements

What are the requirements and compatibility of KPG-D6?

To use KPG-D6, you need the following:

  • A computer with Windows XP, Vista, 7, 8, or 10 operating system

  • A license key for KPG-D6 that you can purchase from an authorized Kenwood reseller

  • A download link for KPG-D6 that you will receive by email after purchasing the license key

  • A programming cable that connects your radio to your computer via USB or serial port

  • A Kenwood NX-1000 series radio that supports either DMR or NXDN digital modes

Note: This software is for USA (K-code) or European (E-code) radios only. Other regions may have different software versions.

kpg-d6 programming software

kpg-d6n nx-1300 nx-1200 programming software & licence key

kpg-d6k kenwood nx-1000 series programming software

kpg-d6 download radiotronics usa

kpg-d6n download kenwood comms

kpg-d6nk download hamfiles

kpg-d6 software for nx-1300 and nx-1200 radios

kpg-d6n software for dmr + fm analogue operation

kpg-d6k software for nxdn + fm analogue operation

kpg-d6 download for windows 10

kpg-d6n download for windows 7

kpg-d6nk download for windows xp

kpg-d6 programming cable required

kpg-d6n programming cable aftermarket kenwood 2-pin

kpg-d6nk programming cable original kenwood kpg-22u

kpg-d6 licence key delivery by email

kpg-d6n licence key upgrade to 40-bit arc4 encryption

kpg-d6nk licence key activation instructions

kpg-d6 how to download after purchase

kpg-d6n how to install and run on windows

kpg-d6nk how to program nx-1000 series radios

kpg-d6 features and functions menu

kpg-d6n features and functions built-in encryption

kpg-d6k features and functions native digital / analogue mixed mode

kpg-d6 user manual pdf download

kpg-d6n user guide pdf download

kpg-d6nk user manual pdf download

kpg-d6 software support unavailable

kpg-d6n software support contact kenwood dealer

kpg-d6nk software support forum hamfiles

kpg-d6 compatible with nxr-1000 repeaters

kpg-d6n compatible with nxr-nx repeaters

kpg-d6k compatible with nxr-x repeaters

kpg-d6 review and rating radiotronics usa

kpg-d6n review and rating kenwood comms

kpg-d6nk review and rating hamfiles

kpg-d6 price and availability radiotronics usa

kpg-d6n price and availability kenwood comms

kpg-d6nk price and availability hamfiles

kpg-d6 free trial download hamfiles

kpg-d6n free trial download kenwood comms

kpg-d6k free trial download radiotronics usa

kpg-d6 alternative software chirp radio programming software

kpg-d6n alternative software nxdn radio programming software

kpg-d6k alternative software dmr radio programming software

kpg-d6 obsolete operating systems tip

kpg-d6n obsolete operating systems tip

kpg-d6k obsolete operating systems tip

How to Download KPG-D6

Where to buy KPG-D6 and how much does it cost?Where to buy KPG-D6 and how much does it cost?

KPG-D6 is not a free software. You need to purchase a license key from an authorized Kenwood reseller to use it. The price may vary depending on the reseller, but it is usually around $100 USD. You can find a list of authorized Kenwood resellers on the official Kenwood website. Alternatively, you can search online for other sources that sell KPG-D6, but be careful of scams and counterfeit products.

How to receive the license key and download link by email?

After you purchase the license key for KPG-D6, you will receive an email from the reseller with the license key and the download link for the software. The email may take some time to arrive, so please be patient and check your spam folder if you don't see it in your inbox. The email will look something like this:

Subject: Your KPG-D6 License Key and Download Link From: Kenwood Reseller To: Your Email Address Dear Customer, Thank you for purchasing the KPG-D6 programming software for NX-1000 series radios. Here is your license key and download link: License Key: XXXX-XXXX-XXXX-XXXX Download Link: Please follow the instructions below to install and activate the software: 1. Download the software from the link above and save it to your computer. 2. Unzip the file and run the setup.exe file to install the software. 3. Launch the software and enter your license key when prompted. 4. Connect your radio to your computer using a programming cable and start programming. If you have any questions or issues, please contact us at Sincerely, Kenwood Reseller

Please note that the license key is valid for one computer only. If you want to use the software on another computer, you need to purchase another license key.

How to install KPG-D6 on your computer?

Installing KPG-D6 on your computer is easy and straightforward. Just follow these steps:

  • Download the software from the link provided in the email and save it to your computer.

  • Unzip the file and run the setup.exe file to install the software.

  • Follow the on-screen instructions and accept the terms and conditions.

  • Choose a destination folder for the software and click Next.

  • Wait for the installation to complete and click Finish.

  • Launch the software and enter your license key when prompted.

  • You are now ready to use KPG-D6.

How to Use KPG-D6

What are the main features and functions of KPG-D6?

KPG-D6 is a powerful and versatile software that allows you to program and configure your NX-1000 series radios with ease and efficiency. Some of the main features and functions of KPG-D6 are:

  • It supports both DMR and NXDN digital modes, as well as FM analog mode.

  • It has a user-friendly interface that shows all the settings and options in a clear and organized way.

  • It has a cloning function that lets you copy the settings from one radio to another, or from a file to a radio.

  • It has a profile function that lets you save and load different settings for different scenarios, such as work, leisure, emergency, etc.

  • It has a backup and restore function that lets you save and restore your radio settings in case of loss or damage.

  • It has a firmware update function that lets you update your radio with the latest features and improvements.

How to connect your radio to your computer using a programming cable?

To program your radio using KPG-D6, you need to connect it to your computer using a programming cable. There are two types of programming cables available for NX-1000 series radios: USB and serial. The USB cable is easier to use, as it does not require any drivers or adapters. The serial cable is more compatible, as it works with older computers that do not have USB ports. Here is how to connect your radio to your computer using either type of cable:

  • Turn off your radio and remove the battery.

  • Attach the programming cable to the accessory connector on the side of the radio.

  • If you are using a USB cable, plug it into a USB port on your computer. If you are using a serial cable, plug it into a serial port on your computer. You may need an adapter if your computer does not have a serial port.

  • Reinstall the battery and turn on your radio.

  • Your radio is now connected to your computer and ready to be programmed.

How to program and configure your radio using KPG-D6?

Programming and configuring your radio using KPG-D6 is easy and intuitive. Just follow these steps:

  • Launch KPG-D6 on your computer and enter your license key if prompted.

Select the communication port that matches the programming cable you are using. For example, if you are using a USB cable, select USB. If you are using a serial cable, s


Stoned Yoga, February 17 2023 RSVP 856-316-4705
bottom of page